Samy Madbouly, Ph.D.

Assistant Professor of Engineering, Plastics Engineering Technology and Polymer Engineering and Science programs
213H Burke

Mailing Address:
PENN STATE BEHREND
242 BURKE CENTER
ERIE PA 16563

Biography

Dr. Madbouly received his Ph.D. from the Department of Organic and Polymeric Materials, Tokyo Institute of Technology, Japan. He has been awarded the Alexander von Humboldt postdoctoral Fellowship (Mainz University, Germany) and the Japan Society for Promotion of Science Postdoctoral Fellowship (Tokyo Institute of Technology). He served as a senior research scientist at the School of Polymers and High-Performance Materials, University of Southern Mississippi and at the Center for Biomaterial Development, Institute of Polymer Research, GKSS, Germany. He also worked as Research Assistant Professor in the Department of Materials Science and Engineering at Iowa State University and Senor Polymer Engineer at Schlumberger.

He published over 95 peer-reviewed journal papers with approximately 3800 citations. He also published 8 patents, two books, 20book chapters, and presented more than 100 talks at national and international meetings, and serves as a frequent reviewer and referee.

Courses Taught at Penn State Behrend
• Rheology & Processing of Polymers, MATSE 447
• Rheology Lab, PES 323
• Fluid and Thermal Sciences (Thermodynamics), PLET 336.
• Advanced Tooling and Rheology, PLET 330 (Lecture and Lab)
• Heat Transfer, PLET 345
• Plastics Medical Applications, PLET 483
• Introduction to Plastics , PLET 205
• Plastics Material Properties and Applications, PLET 304
• Rapid Commercialization, PLET 468 (Lecture and Lab)


Professional Status:
• Listed in the top 2% of most-cited scientists in Stanford University’s 2021 rankings
• Vice Chair, American Chemical Society, Erie, PA
• Associate Editor, Nanofabrication
• Associate Editor, Biomaterials and Polymers Horizon
• Guest Editor, " Advanced Biodegradable Polymers" Molecules
• Editor "Biopolym. and Compo." 2021 Book. Walte de Gruyter GmbH & Co KG
• Editor for "Bio-based Plant Oil Polym. Compos." 2015 Book. William Andrew, Elsevier



Research Projects
• Dynamic and static rheology of biopolymers, blends, and nanocomposites
• Biodegradable and biocompatible shape-memory polymers and composites
• Elastomers and thermally conductive epoxy resins for down hole applications
• Formulation and applications of aqueous polyurethane dispersions Processing, phase behavior, and morphology of polymer blends and nanocomposites
• Characterization of polymeric materials including polymer films, nanocomposites, dispersions and hydrogels (Rheology, Broadband dielectric spectroscopy, DMA, TMA, DSC, TGA, Instron, X-ray, Light scattering, TEM, SEM etc.).


Awards and Sponsored Research Funding
• Scale-up of Biodegradable Plastics Product to Enable the Economic Renewable Aviation Fuels," DOE (2023-2026).

• From Carbon Dioxide to Future Bioplastic Manufacturing for Environmental Sustainability, NSF (2023-2024).

• Biorenewable Polymers and Composites as Alternative for Petroleum-Based Counterparts: Formulations, Processing and Applications," VentureWell (2022-2024).

• Effect of Bio-based Additives on the Biodegradation Process of Some Selected Polymers," Caplugs, Corporations (2021-2023).

• Tape Tower Incoming Resin Testing and Process Optimization," Glad Manufacturing Company, Corporations (2022-2023).

• Novel bio-based shape memory nanostructure polymer blends for biomedical application," RDG 2021 Award (2021-2023).

• Multifunctional Bio-based Polyurethane Smart Mesh for treating stress urinary incontinence," Magee Women Research Institute & Foundation, Associations, Institutes, Societies and Voluntary Health Agencies (2021-2023).

Honors and Awards
• Penn State, School of Engineering, Distinguished Award for Excellence in Research (2022).

• Japan Society for Promotion of Science Postdoctoral Fellowship, Japan, Sep. 2002-Aug. 2004.

• Alexander von Humboldt Postdoctoral Fellowship, Germany, May 2001-August 2002.

• UNESCO, Short Term Postdoctoral Fellowship, Japan, March 2001-May 2001.

• Monbusho Fellowship, Japan 1996-1999 (International graduate program).

• Awarded the Prize of Prof. Hamid Khalifa in Chemistry, 1992.


Service
• Member, Penn State Erie, School of Engineering Scholarship and Awards Committee (2021-present).

• Member, Penn State Erie, School of Engineering Research Committee, (2020 - Present).

• Member, Penn State Erie, School of Engineering, PLET Department Hiring Search Committee, (2021 - Present).

• Member, Penn State Erie, School of Engineering, PES Department Hiring Search Committee, (2021 - Present).


Patents
• Madbouly, S., Patent, "Coated Downhole Components.", Sponsor/Agency Award number: WO2016089938A1. (Application: 2017, approve: 2021).

• Madbouly, S., Patent, "Polymeric materials.", Sponsor/Agency Award number: US20180041086A1. (Application: 2016, approve: 2021).

• Holzmueller, J., Madbouly, S., Patent, "Armored submersible power cable.", Sponsor/Agency Award number: WO2018022237A1. (Application: 2016, approve: 2018).

• Lochhead, R. Y., Madbouly, S., Patent, "Dispersant for spilled oil.", Sponsor/Agency Award number: US20130075337A1. (Application: 2011, approve: 2016).

• Madbouly, S., Patent, "Polymer Materials for Downhole Applications.", Sponsor/Agency Award number: PCT/US2015/ 063319. (Application: 2013, approve: 2015).

• Weigel, T., Madbouly, S., Patent, "Item with at least one thermoprogrammable switching section for applications in contact with materials having high heat transfer coefficients.", Sponsor/ Agency Award number: US20110305889A1. (Application: 2008, approve: 2014).

• Lendlein, A., Madbouly, S., Patent, "Molded foam body having anisotropic shape memory properties, method for manufacturing same and article comprising the molded foam body.", Sponsor/ Agency Award number: US20120308804A1. (Application: 2009, approve: 2012).

• Wicks, D. A., Madbouly, S., Patent, "Polyurethane dispersions containing POSS nanoparticles.", Sponsor/Agency Award number: US20080108773A1. (Application: 2006, approve: 2008).

Dr. Madbouly main research areas focus on (1) biopolymers, polymer blends, polymer matrix nanocomposites, dispersions, and gels; (2) biocompatible and biodegradable shape-memory polymers; (3) formulation and applications of bio-based aqueous polyurethane in coatings and adhesive industries; (4) processing, phase behavior, and morphology of polymer blends and nanocomposites under static condition and shear flow; (5) characterization of polymeric materials including polymer films, nanocomposites, dispersions and hydrogels (Rheology, Broadband Dielectric Spectroscopy, DMA, TMA, DSC, TGA, Instron, X-ray, Light scattering, TEM, SEM, etc.).

From plant phenols to novel bio-based polymers, Progress in Polymer Science - 2022
Collaborators: Chaoqun Zhang, Primary Author; Junqi Xue, Co-Author; Xiangyu Yang, Co-Author

Bio-based castor oil and lignin sulphonate: aqueous dispersions and shape-memory films, Biomaterials and Polymers Horizon - May 25, 2022

Shape-Memory Polymers Based on Castor Oil and Lignin Sulphonate Synthesized from Waterborne Disp.

Biodegradable PCL-Based Polymers, Biopolymers and Composites : Processing and Characterization - 2021
Collaborators: Marissa Torretti, Student Author; Emily Archer, Student Author

Biodegradable poly(butylene adipate-co-terephthalate) (PBAT), Biopolymers and Composites: Processing and Characterization - 2021
Collaborators: Ty Burford, Student Author; William Rieg, Student Author

Biodegradable polylactic acid (PLA), Biopolymers and Composites : Processing and Characterization - 2021
Collaborator: James Goodsel, Student Author

Biodegradable shape-memory polymers and composites, Biopolymers and Composites: Processing and Characterization - 2021
Collaborators: Tanner Joseph, Co-Author; Shaelyn Ross, Co-Author

Anisotropy Effects in the Shape‐Memory Performance of Polymer Foams, Macromolecular Materials and Engineering - 2021
Collaborators: Tilman Sauter, Primary Author; Karl Kratz, Co-Author; Array Array

Recyclable and Fluorescent Epoxy Polymer Networks from Cardanol Via Solvent-Free Epoxy-Thiol Chemistry, ACS Applied Polymer Materials - 2021
Collaborator: Yanzi Ke, Primary Author

Waterborne Polyurethane Dispersions and Thin Films: Biodegradation and Antimicrobial Behaviors, Molecules - 2021

Effect of glass fiber on the viscoelastic and thermomechanical properties of poly (ether ether ketone), ANTEC 2021 - June, 2021

Biodegradable polycaprolactone (PCL) based polymer and composites, Physical Sciences Reviews - June 3, 2021
Collaborators: Marissa Torretti, Co-Author; Emily Archer, Co-Author

Soybean-based polymers and composites, Physical Sciences Reviews - May 28, 2021
Collaborators: Edlis Sean, Student Author; Ionadi Nicolas, Student Author

Bio-based polyhydroxyalkanoates blends and composites, Physical Sciences Reviews - May 28, 2021

Biopolymers and Composites: Processing and Characterization, Book - April, 2021
Collaborator: Chaoqun Zhang, Co-Editor

Bio-based polyhydroxyalkanoates blends and composites, Biopolymers and Composites : Processing and Characterization - April, 2021

Biodegradable shape-memory polymers and composites, Physical Sciences Reviews - April 19, 2021
Collaborators: Tanner Joseph, Co-Author; Shaelyn Ross, Co-Author

"Sustainable Polyurethane-Lignin Aqueous Dispersions and Thin Films: Rheological Behavior and Thermomechanical Properties", ACS Applied Polymer Materials - April, 2021
Collaborator: Michael Kessler, Co-Author

Novel Internal Emulsifiers for High Biocontent Sustainable Pressure Sensitive Adhesives, ACS Sustainable Chemistry & Engineering - 2020
Collaborators: Lingxiao Liu Liu, Primary Author; Henghui Deng, Co-Author; Wenbo Zhang, Co-Author

Preparation of Nanoscale Semi-IPNs with an Interconnected Microporous Structure via Cationic Polymerization of Bio-Based Tung Oil in a Homogeneous Solution of Poly ($\varepsilon$-caprolactone), ACS omega - July 1, 2020
Collaborator: Michael Kessler, Co-Author

Nano/micro-scale morphologies of semi-interpenetrating poly (ε− caprolactone)/tung oil polymer networks: Isothermal and non− isothermal crystallization kinetics, Polymer Testing - May 5, 2020

Rheokinetics of Thermal-Induced Gelation of Liquid Polybutadiene Resin, ANTEC - March 29, 2020

Non-isothermal crystallization kinetics of novel nanoblends prepared from simultaneous in-situ cationic polymerization and compatibilization of bio-based tung oil and biodegradable poly(e- Caprolactone), ANTEC - March 18, 2019

Recent advances in vegetable oil-based polymers and their composites, Progress in Polymer Science - 2017
Collaborators: Chaoqun Zhang, Co-Author; Thomas Garrison, Author; Michael Kessler, Author

Self-Metathesis of 10-Undecen-1-Ol with Ru-Amine-Based Complex for Preparing the Soft Segment and Chain Extender of Novel Castor Oil-Based Polyurethanes - 2016
Collaborators: Larissa Fonseca, Author; James Bergman, Author; Michael Kessler, Author; Benedito Lima-Neto, Author

Dispersant for spilled oil, US Patent - May, 2016
Collaborators: Robert Lochhead, Author; Sarah Morgan, Author; Yan Zong, Author

Bio-based Plant Oil Polymers and Composites, Book - 2015
Collaborators: Michael Kessler, Co-Editor; Chaoqun Zhang, Co-Editor

Application of Plant Oil-Based Products in Structural Health Monitoring, Book - 2015
Collaborator: Simon Laflamme, Author

Characterization of Polymer Blends by Dielectric Spectroscopy and Thermally Simulated Depolarization Current, Book - 2015
Collaborator: Michael Kessler, Author

Fiber Reinforced Plant Oil-Based Composites, Bio-Based Plant Oil Polymers and Composites - 2015
Collaborators: Kunwei Liu, Author; Chaoqun Zhang, Author

Plant Oil-Based Derivatives, Book - 2015
Collaborator: Chaoqun Zhang, Author

Vegetable-based copolymers based on blend of acrylated epoxidized soybean oil and tung oil, Conference - 2015
Collaborators: Kunwei Liu, Author; David Grewell, Author

Bio-based soft elastomeric capacitor for structural health monitoring applications, Structural Health Monitoring - 2015
Collaborators: Sari Kharroub, Author; Simon Laflamme, Author; Filippo Ubertini, Author

Biobased polyurethanes prepared from different vegetable oils, ACS applied materials \& interfaces - 2015
Collaborators: Chaoqun Zhang, Author; Michael Kessler, Author

Biorenewable thermosetting copolymer based on soybean oil and eugenol, European Polymer Journal - 2015
Collaborators: Kunwei Liu, Author; Michael Kessler, Author

Characterization and biodegradation behavior of bio-based poly (lactic acid) and soy protein blends for sustainable horticultural applications, Green Chemistry - 2015
Collaborators: Shengzhe Yang, Author; James Schrader, Author; Gowrishankar Srinivasan, Author; David Grewell, Author; Kenneth McCabe, Author; Michael Kessler, Author; William Graves, Author

Development and evaluation of bioplastic containers for sustainable greenhouse and nursery production, Acta Hort - 2015
Collaborators: James Schrader, Author; Kenneth McCabe, Author; Gowrishankar Srinivasan, Author; Kyle Haubrich, Author; David Grewell, Author; WR Graves, Author

In situ polymerization of bio-based thermosetting polyurethane/graphene oxide nanocomposites, Journal of Applied Polymer Science - 2015
Collaborators: Jing Zhang, Author; Chaoqun Zhang, Author

Plant Oil-Based Nanocomposites, Bio-based Plant Oil Polymers and Composites - 2015
Collaborators: Chaoqun Zhang, Corresponding Author; Jing Zhang, Author

Processing and characterization of bio-based poly (hydroxyalkanoate)/poly (amide) blends: Improved flexibility and impact resistance of PHA-based plastics, Journal of Applied Polymer Science - 2015
Collaborators: Shengzhe Yang, Author; James Schrader, Author; David Grewell, Author; Michael Kessler, Author; William Graves, Author

Renewable polymers prepared from vanillin and its derivatives, Macromolecular Chemistry and Physics - 2015
Collaborators: Chaoqun Zhang, Author; Michael Kessler, Author; Array Array

Thermal and Oxidative Degradation Behavior of Polymers and Nanocomposites, Reactions and Mechanisms in Thermal Analysis of Advanced Materials; John Wiley \& Sons, Ltd.: Hoboken, NJ, USA - 2015
Collaborator: Gauri Ramasubramanian, Author

Unexpected tackifiers from isosorbide, ChemSusChem - 2015
Collaborators: Michael Zenner, Author; Jason Chen, Author; Michael Kessler, Author

Biorenewable polymer composites from tall oil‐based polyamide and lignin‐cellulose fiber, Journal of Applied Polymer Science - December 20, 2015
Collaborators: Kunwei Liu; Michael Kessler

Development and evaluation of bioplastic containers for sustainable greenhouse and nursery production - 2014
Collaborators: G Srinivasan, Author; K Haubrich, Author; D Grewell, Author; JA Schrader, Author; KG McCabe, Author; WR Graves, Author

Dielectric spectroscopy for biorenewable plant oil-based polyurethane - 2014
Collaborator: MR Kessler, Author

Evaluation and Classification of Bioplastic Plant Containers - 2014
Collaborators: James Schrader, Author; Kenneth McCabe, Author; Gowrishankar Srinivasan, Author; David Grewell, Author; Kyle Haubrich, Author; Heidi Kratsch, Author; Christopher Currey, Author; William Graves, Author

Novel nanoblends prepared from simultaneous in-situ polymerization and compatibilization of bio-based plant oils and thermoplastic polymer - 2014
Collaborators: Kunwei Liu, Author; Michael Kessler, Author

Bio-inspired green surface functionalization of PMMA for multifunctional capacitors, RSC advances - 2014
Collaborators: Vijay Thakur, Author; Danny Vennerberg, Author; Michael Kessler, Author

Biodegradation behavior of bacterial-based polyhydroxyalkanoate (PHA) and DDGS composites, Green Chemistry - 2014
Collaborators: James Schrader, Author; Gowrishankar Srinivasan, Author; Kunwei Liu, Author; Kenneth McCabe, Author; David Grewell, Author; William Graves, Author; Michael Kessler, Author

Biodegradation behavior of poly (lactic acid)(PLA)/distiller’s dried grains with solubles (DDGS) composites, ACS Sustainable Chemistry \& Engineering - 2014
Collaborators: Hong Lu, Corresponding Author; James Schrader, Author; Gowrishankar Srinivasan, Author; Kenneth McCabe, Author; David Grewell, Author; Michael Kessler, Author; William Graves, Author

Evaluation of biopolymer-coated fiber containers for container-grown plants, HortTechnology - 2014
Collaborators: Kenneth McCabe, Author; James Schrader, Author; David Grewell, Author; William Graves, Author

Novel bio-based composites of polyhydroxyalkanoate (PHA)/distillers dried grains with solubles (DDGS), RSC advances - 2014
Collaborators: Hong Lu, Author; James Schrader, Author; Micheal Kessler, Author; David Grewell, Author; William Graves, Author

PMMA-g-SOY as a sustainable novel dielectric material, RSC Advances - 2014
Collaborators: Vijay Thakur, Author; Mahendra Thunga, Author; Michael Kessler, Author

Semi-interpenetrating polymer networks prepared from in situ cationic polymerization of bio-based tung oil with biodegradable polycaprolactone, RSC Advances - 2014
Collaborators: Kunwei Liu, Author; Ying Xia, Author; Michael Kessler, Author

Item with at least one thermoprogrammable switching section for applications in contact with materials having high heat transfer coefficients - February, 2014
Collaborators: Thomas Weigel, Author; Andreas Lendlein, Author; Array L\"utzow, Karola, Author; Frank Klein, Author

Development and Evaluation of Injection-molded Bioplastic Container Prototypes - 2013
Collaborators: James Schrader, Author; Kenneth McCabe, Author; Gowrishanker Srinivasan, Author; Kyle Haubrich, Author; David Grewell, Author; Michael Kessler, Author; William Graves, Author

Evaluation of Bioplastic-coated Fiber Containers for Greenhouse Grown Plants - 2013
Collaborators: James Schrader, Author; Kenneth McCabe, Author; Gowrishankar Srinivasan, Author; David Grewell, Author; Michael Kessler, Author; William Graves, Author

Broadband Dielectric Relaxation Spectroscopy of Functionalized Biobased Castor Oil Copolymer Thermosets, Macromolecular Chemistry and Physics - 2013
Collaborators: Ying Xia, Author; Michael Kessler, Author

Effects of blending on the molecular dynamics of highly interacting binary polymer blends of poly (methyl methacrylate) and poly [styrene-co-(maleic anhydride)], Polymer international - 2013

Rheological behavior of environmentally friendly castor oil-based waterborne polyurethane dispersions, Macromolecules - 2013
Collaborators: Ying Xia, Author; Michael Kessler, Author

Molded foam body having anisotropic shape memory properties, method for manufacturing same and article comprising the molded foam body - December, 2012
Collaborators: Andreas Lendlein, Author; Andreas Klein, Author; Karl Kratz, Author; Array L\"utzow, Karola, Author

Degradable polyurethane/soy protein shape-memory polymer blends prepared via environmentally-friendly aqueous dispersions, Macromolecular materials and engineering - 2012
Collaborator: Andreas Lendlein, Author

Rheokinetics of ring-opening metathesis polymerization of bio-based castor oil thermoset, Macromolecules - 2012
Collaborators: Ying Xia, Author; Michael Kessler, Author

AFM and QCM-D Characterization of Dispersions of Hydroxyprolpylcellulose, Lecithin and Oil in Water - 2011
Collaborators: Yan Zong, Author; Robert Lochhead, Author; Sarah Morgan, Author

Nonisothermal crystallization kinetics of miscible blends of polycaprolactone and crosslinked carboxylated polyester resin, Journal of Macromolecular Science, Part B - 2011

Temperature-memory polymer networks with crystallizable controlling units, Advanced Materials - 2011
Collaborators: Karl Kratz, Author; Wolfgang Wagermaier, Author; Andreas Lendlein, Author

Effect of method of preparation on the rheological behavior of polyurethane-polyhedral oligomeric silsesquioxanes nanostructured hybrid films, Book - 2009
Collaborators: Joshua Otaigbe, Author; Ajaya Nanda, Author; Douglas Wicks, Author

Polyurethane-polyhedral oligomeric silsesquioxanes nanostructured hybrid dispersions by the prepolymer mixing process, Book - 2009
Collaborators: Joshua Otaigbe, Author; Ajaya Nanda, Author; Douglas Wicks, Author

Shape-memory polymer composites - 2009
Collaborator: Andreas Lendlein, Author

Recent advances in synthesis, characterization and rheological properties of polyurethanes and POSS/polyurethane nanocomposites dispersions and films, Progress in Polymer Science - 2009
Collaborator: Joshua Otaigbe, Author

Thermomechanical behaviour of biodegradable shape-memory polymer foams, MRS Online Proceedings Library Archive - 2009
Collaborators: Karl Kratz, Author; Frank Klein, Author; Array L\"uetzow, Karola, Author; Andreas Lendlein, Author

Polyurethane dispersions containing POSS nanoparticles - May, 2008
Collaborators: Douglas Wicks, Author; Ajaya Nanda, Author; Joshua Otaigbe, Author

Broadband dielectric spectroscopy of nanostructured maleated polypropylene/polycarbonate blends prepared by in situ polymerization and compatibilization, Polymer - 2007
Collaborator: Joshua Otaigbe, Author

Crystallization kinetics of PHB/PVAc blends using time resolved dielectric spectroscopy, European Polymer Journal - 2007
Collaborators: Ashraf Mansour, Author; Nahed Abdou, Author

Effect of curing on the broadband dielectric spectroscopy of powder coating, European polymer journal - 2007
Collaborators: Ahmed Eldin, Author; Ashraf Mansour, Author

Isothermal crystallization kinetics in binary miscible blend of poly ($\varepsilon$-caprolactone)/tetramethyl polycarbonate, Journal of applied polymer science - 2007

Molecular dynamics of amorphous/crystalline polymer blends studied by broadband dielectric spectroscopy, European polymer journal - 2007
Collaborators: Ashraf Mansour, Author; Nahed Abdou, Author

Rheological Behavior of POSS/Polyurethane- Urea Nanocomposite Films Prepared by Homogeneous Solution Polymerization in Aqueous Dispersions, Macromolecules - 2007
Collaborators: Joshua Otaigbe, Author; Ajaya Nanda, Author; Douglas Wicks, Author

Thiol- ene free-radical and vinyl ether cationic hybrid photopolymerization, Macromolecules - 2007
Collaborators: Huanyu Wei, Author; Qin Li, Author; Moriam Ojelade, Author; Joshua Otaigbe, Author; Charles Hoyle, Author

Unusual accelerated molecular relaxations of a tin fluorophosphate glass/polyamide 6 hybrid studied by broadband dielectric spectroscopy, Polymer - 2007
Collaborators: Kevin Urman, Author; Joshua Otaigbe, Author

Broadband dielectric spectroscopy of mPP/PC blend prepared via in situ polymerization and compatibilization, Conference - 2006
Collaborators: Joshua Otaigbe, Author; Mohamed Hassan, Author; Kenneth Mauritz, Author

Effect of preparation method on the rheological behavior of waterborne polyurethane disperswion, Conference - 2006
Collaborators: Joshua Otaigbe, Author; Ajaya Nanda, Author; Douelas Wicks, Author

Isothermal crystallization kinetics of poly ($\varepsilon$-caprolactone) with tetramethyl polycarbonate and poly (styrene-co-acrylonitrile) blends using broadband dielectric spectroscopy, Macromolecular Chemistry and Physics - 2006
Collaborators: Nahed Abdou, Author; Ashraf Mansour, Author

Kinetic analysis of fractal gel formation in waterborne polyurethane dispersions undergoing high deformation flows, Macromolecules - 2006
Collaborator: Joshua Otaigbe, Author

Morphology and properties of novel blends prepared from simultaneous in situ polymerization and compatibilization of macrocyclic carbonates and maleated poly (propylene), Macromolecular Chemistry and Physics - 2006
Collaborators: Joshua Otaigbe, Author; Toshiaki Ougizawa, Author

Nanostructured polyurethane/POSS hybrid aqueous dispersions prepared by homogeneous solution polymerization, Macromolecules - 2006
Collaborators: Ajaya Nanda, Author; Douglas Wicks, Author; Joshua Otaigbe, Author

Effect of ionic content, solid content, degree of neutralization, and chain extension on aqueous polyurethane dispersions prepared by prepolymer method, Journal of applied polymer science - 2005
Collaborators: Ajaya Nanda, Author; Douglas Wicks, Author; Joshua Otaigbe, Author

Effect of shear history on the morphology and coarsening behaviour of polycarbonate/poly (styrene-co-acrylonitrile) blend, Polymer - 2005
Collaborators: Gehan Hanafy, Author; Toshiaki Ougizawa, Author; Takashi Inoue, Author

Phase Behavior and Morphology of Poly (Methyl Methacrylate)/Poly ($\alpha$-Methyl Styrene-co-Acrylonitrile) Blends Under Quiescent and Shear Flow, Journal of Macromolecular Science, Part C: Polymer Reviews - 2005
Collaborator: Toshiaki Ougizawa, Author

Rheokinetics of thermal-induced gelation of waterborne polyurethane dispersions, Macromolecules - 2005
Collaborator: Joshua Otaigbe, Author

Rheological behavior of aqueous polyurethane dispersions: effects of solid content, degree of neutralization, chain extension, and temperature, Macromolecules - 2005
Collaborators: Joshua Otaigbe, Author; Ajaya Nanda, Author; Douglas Wicks, Author

Thermal-induced simultaneous liquid--liquid phase separation and liquid--solid transition in aqueous polyurethane dispersions, Polymer - 2005
Collaborators: Joshua Otaigbe, Author; Ajaya Nanda, Author; Douglas Wicks, Author

Crystallization kinetics of poly (ethylene oxide) from its melt and from mixtures with tetrahydronaphthalene and oligo (ethylene oxide-block-dimethylsiloxane), Journal of Polymer Science Part B: Polymer Physics - 2004
Collaborator: Bernhard Wolf, Author

Effect of shear memory on the coarsening behaviour of polystyrene and poly (vinyl methyl ether) blend, Polymer - 2004
Collaborators: Toshiaki Ougizawa, Author; Takashi Inoue, Author

Effects of AN-contents and shear flow on the miscibility of PC/SAN blends, Polymer - 2004
Collaborators: Gehan Hanafy, Author; Toshiaki Ougizawa, Author; Takashi Inoue, Author

Isothermal Crystallization of Poly ($\varepsilon$-caprolactone) in Blend with Poly (styrene-co-acrylonitrile): Influence of Phase Separation Process, Macromolecular Chemistry and Physics - 2004
Collaborator: Toshiaki Ougizawa, Author

Rheological investigation of shear induced-mixing and shear induced-demixing for polystyrene/poly (vinyl methyl ether) blend, Macromolecular Chemistry and Physics - 2004
Collaborator: Toshiaki Ougizawa, Author

Spinodal Decomposition in Binary Blend of Poly (methyl methacrylate)/Poly ($\alpha$-methyl styrene-co-acrylonitrile): Analysis of Early and Late Stage Demixing, Macromolecular Chemistry and Physics - 2004
Collaborator: Toshiaki Ougizawa, Author

Thermal Cross-Linking of Poly (Vinyl Methyl Ether). I. Effect of Cross-Linking Process on the Viscoelastic Properties, Journal of Macromolecular Science, Part B - 2004
Collaborator: Toshiaki Ougizawa, Author

Binary miscible blends of poly (methyl methacrylate)/poly ($\alpha$-methyl styrene-co-acrylonitrile). IV. Relationship between shear flow and viscoelastic properties, Journal of Macromolecular Science, Part B - 2003

Rheological investigation of shear-induced crystallization of poly (ϵ-caprolactone), Journal of Macromolecular Science, Part B - 2003
Collaborator: Toshiaki Ougizawa, Author

Shear-Induced Crystallization and Shear-Induced Dissolution of Poly (ethylene oxide) in Mixtures with Tetrahydronaphthalene and Oligo (dimethyl siloxane-b-ethylene oxide), Macromolecular Chemistry and Physics - 2003
Collaborator: Bernhard Wolf, Author

Binary miscible blends of poly (methyl methacrylate)/poly ($\alpha$-methyl styrene-co-acrylonitrile). III. Investigation of the phase behavior and morphology during shear flow, Journal of Macromolecular Science, Part B - 2002
Collaborator: Toshiaki Ougizawa, Author

Broadband Dielectric Spectroscopy for Poly (methyl methacrylate)/Poly ($\alpha$-methyl styrene-co-acrylonitrile) Blend, Polymer journal - 2002

Equilibrium phase behavior of polyethylene oxide and of its mixtures with tetrahydronaphthalene or/and poly (ethylene oxide-block-dimethylsiloxane), The Journal of chemical physics - 2002
Collaborator: Bernhard Wolf, Author

Shear effect on the phase behaviour and morphology in oligomer blend of polystyrene/poly (methyl methacrylate), Polymer - 2001
Collaborators: T Chiba, Author; T Ougizawa, Author; T Inoue, Author

Shear flow effect on phase behavior and morphology in polymer blends - 2000
Collaborators: Toshiaki Ougizawa, Author; Takashi Inoue, Author

Effect of the shear flow on the phase behaviour of polystyrene/poly (vinyl methyl ether) blend, Polymer - 1999
Collaborators: Masashi Ohmomo, Author; Toshiaki Ougizawa, Author; Takashi Inoue, Author

Phase behavior under shear flow in PMMA/SAN blends: Effects of molecular weight and viscosity, Macromolecules - 1999
Collaborators: Toshiaki Ougizawa, Author; Takashi Inoue, Author

Shear effect on the phase behavior and morphology in PMMA/SAN-29.5 blend, Journal of Macromolecular Science—Physics - 1999
Collaborators: Tsuneo Chiba, Author; Toshiaki Ougizawa, Author; Takashi Inoue, Author

Effect of method of preparation on molecular packing of TMPC/PS blends, Polymer international - 1997
Collaborators: Ashraf Mansour, Author; Array H\"ohne, G\"unther, Author; Walter Dollhopf, Author

Dielectric investigation of molecular dynamics of blends: III. Effect of molecular weight in TMPC/PS blends, Polymer international - 1996
Collaborators: Ashraf Mansour, Author; Array H\"ohne, G\"unther WH, Author

Dielectric investigation of the molecular dynamics in blends: Polymers with similar molecular architecture (TMPC/PC blend), Polymer international - 1995
Collaborator: Ashraf Mansour, Author

Ph D, Polymer Engineering, Tokyo Institute of Technology

MS, Polymer Science, Cairo University

BS, Chemistry, Cairo University