Adam Hollinger, Ph.D.

Adam Hollinger, Ph.D.
Associate Professor, Mechanical Engineering
Office Phone
Office Location
222 AMIC Building
AMIC
5350 TECHNOLOGY DRIVE
ERIE PA 16510
    Biography

    Dr. Adam Hollinger is an associate professor of mechanical engineering at Penn State Behrend. He received a B.S. in Engineering Science (2006) from the Pennsylvania State University, and an M.S. in Mechanical Engineering (2009), and Ph.D. in Chemical Engineering (2012) from the University of Illinois at Urbana-Champaign.

    Research Interests

    Microscale fuel cells, lithium-ion batteries, electrically-conductive polymer composites, microchemical systems

    Publications

    Mechanical and Electrical Properties of Injection-Molded MWCNT-Reinforced Polyamide 66 Hybrid Composites, Journal of Composites Science - November, 2020
    Collaborators: Ross Zameroski, Co-Author; Chadwick Kypta, Co-Author; Brian Young, Co-Author; Seyed Hamid Reza Sanei, Primary Author

    Cylindrical Lithium-ion Structural Batteries for Drones, International Journal of Energy Research - January, 2020
    Collaborators: Dylan McAnallen, Co-Author; Matthew Brockett, Co-Author; Scott DeLaney, Co-Author; Jun Ma, Co-Author; Christopher Rahn, Co-Author

    Effects of Operating Conditions on the Heat Management of a Microscale Fuel Cell - July, 2019
    Collaborators: Liyong Sun, Primary Author; Jun Zhou, Secondary Author

    Uncertainty Analysis of Thermal Conductivity Measurement by a Homemade Apparatus - March, 2018
    Collaborators: Liyong Sun, Co-Author; Robert Edwards; Meredith Sander, Co-Author

    Model-based Analysis of Thermal and Geometrical Effects in a Microscale Methanol Fuel Cell, International Journal of Hydrogen Energy - February, 2018
    Collaborators: Daniel Doleiden, Co-Author; Michael Willis, Co-Author; Scott DeLaney, Co-Author; Mary Burbules; Kelly Miller; Nazlihan Argun, Co-Author

    Electrically Conductive Polymer Composites for Injection Molding of Bipolar Plates - December, 2017
    Collaborators: Meredith Sander, Co-Author; James Pritts, Co-Author; Brian Young, Co-Author; Anthony Santamaria, Co-Author

    Burst Testing of Biomaterials for Medical Applications - October, 2017
    Collaborators: Kelly Miller, Author; Gerald Kirk, Author; Jian Yang, Author

    Comparison of Partial Credit and Mastery Assessment on Student Learning and Retention - October, 2017
    Collaborators: Shraddha Sangelkar; William Lasher; Russell Warley

    Design and Development of a Battery Internal Short Circuit Test Machine - July, 2017
    Collaborators: Scott DeLaney, Co-Author; Mary Burbules, Co-Author; Mayank Garg, Co-Author; Christopher Rahn, Co-Author

    Modeling of Heat Removal in a Single-Channel Microscale Fuel Cell - July, 2017
    Collaborator: Liyong Sun, Co-Author

    Thermal Contact Resistance Measurements of Compressed PEFC Gas Diffusion Media, Journal of Electrochemical Energy Conversion and Storage - November, 2016
    Collaborator: Stefan Thynell

    Electrohydrodynamic-Jet Deposition of Pt-based Fuel Cell Catalysts - July, 2016
    Collaborator: Paul Kenis

    Model-based Analysis of Electrode Design in a Direct Methanol Microscale Fuel Cell - July, 2015
    Collaborators: Michael Willis; Daniel Doleiden

    Thermal Contact Resistance Measurements of Gas Diffusion Layers in Polymer Electrolyte Fuel Cells - July, 2015
    Collaborator: Stefan Thynell

    Manufacturing All-polymer Laminar Flow-based Fuel Cells, Journal of Power Sources - October, 2013
    Collaborator: Paul Kenis, Secondary Author

    Education

    Ph D, Chemical Engineering, University of Illinois

    MS, Mechanical Engineering, University of Illinois

    BS, Engineering Science, Pennsylvania State University