Mark Rubeo, Ph.D.

Dr. Mark Rubeo
Assistant Professor, Mechanical Engineering
[email protected]
814-898-7587
253 AMIC Building

Mailing Address:
PENN STATE BEHREND
253 AMIC BUILDING
5350 TECHNLOGY DRIVE
ERIE PA 16563

Dr. Mark Rubeo is an Assistant Professor of Mechanical Engineering at Penn State Behrend. He received his B.S. in Mechanical Engineering from Penn State Behrend in 2012. He received his M.S. (2014) and Ph.D. (2016) in Mechanical Engineering from the University of North Carolina at Charlotte.

Dr. Rubeo's research interests include:
- precision machine design
- metrology
- advanced manufacturing

Tool path planning for ultra-precision machining of NURBS surfaces - October 30, 2018
Collaborator: Christopher Morgan, Primary Author

Two degree of freedom frequency domain surface location error prediction, Precision Engineering - April 1, 2017
Collaborators: Kadir Kiran, Primary Author; Mehmet Kayacan, Co-Author; Tony Schmitz, Co-Author

A fundamental investigation of modulated tool path turning mechanics, Procedia Manufacturing - January 1, 2017
Collaborators: Ryan Copenhaver, Primary Author; Steven Guzorek, Co-Author; Saurabh Landge, Co-Author; Scott Smith, Co-Author; John Ziegert, Co-Author; Tony Schmitz, Co-Author

Amplitude ratio: a new metric for milling stability identification, Procedia Manufacturing - January 1, 2017
Collaborator: Tony Schmitz, Secondary Author

Experimental platform for in-process metrology during orthogonal turning - October 30, 2016
Collaborators: Ryan Copenhaver, Secondary Author; Saurabh Landge, Co-Author; Tony Schmitz, Co-Author

Global stability predictions for flexible workpiece milling using time domain simulation, Journal of Manufacturing Systems - July 1, 2016
Collaborator: Tony Schmitz, Secondary Author

Mechanistic force model coefficients: A comparison of linear regression and nonlinear optimization, Precision Engineering - July 1, 2016
Collaborator: Tony Schmitz, Secondary Author

Milling force modeling: a comparison of two approaches, Procedia Manufacturing - January 1, 2016
Collaborator: Tony Schmitz, Secondary Author

Productivity progression with tool wear in titanium milling, Procedia Manufacturing - January 1, 2016
Collaborators: Joyson Menezes, Primary Author; Kadir Kiran, Co-Author; Andrew Honeycutt, Co-Author; Tony Schmitz

The design of a multiple degree of freedom flexure stage with tunable dynamics for milling experimentation, Transactions of the NAMRI/SME - January 1, 2016
Collaborators: Kadir Kiran, Secondary Author; Tony Schmitz, Co-Author

Time domain modeling of compliant workpiece milling - October 30, 2015
Collaborator: Tony Schmitz, Secondary Author

Ph.D., Mechanical Engineering, The University of North Carolina at Charlotte

M.S., Mechanical Engineering, The University of North Carolina at Charlotte

B.S., Mechanical Engineering, The Pennsylvania State University

A.S., Machine Tool Technology, New Castle School of Trades